Home Improvement

Guidelines to Installing a New Window

Installing a New Window

Does your living room’s window no longer keep the rain water out? Is your kitchen’s window frame getting cracked? If yes, it’s time to get rid of the old window and install a new one taking your first step toward home renovation. You can always go to replacement windows in ann arbor MI to buy a new one and install it yourself. Here’s a step by step guide on how to install a new window:

Installing a New Window

Image by Andersen Windows

1. Take Measurements:

Take the measurements before you order a new window. You don’t want to end up with a window that is too large or too small for the opening. Take a measuring tape and start measuring the width between the side jambs at the top, middle and bottom. Note down the measurements. Next, record the height from the top jamb to the sill. Write that down too. Make sure your windows provider has recorded all the measurements right. Double check everything just to be sure.

Take Measurements

Image by Andersen Windows

2. Remove The Old Window:

Now that your order has arrived, it’s time to grab your tools. Before you start installing the new window, you would have to remove the old window’s trim and jam extension using a prybar. As you remove the jamb, unscrew the window from the frame. Be very careful while removing the glass. If your window has several sashes, you can remove each one by one.

Remove The Old Window

Image by William Murphy

3. Look for Any Damages:

After you’ve removed the old window carefully, next step is to check the jamb for any damages. If your old window had leaking issue, you would definitely see some rotting there. Make sure you deal with the rotting before you start installing the new window else it would do you no good.

Look for Any Damages

Image by Mike Tungate

4. Check for Any Fitment Issues:

Before you apply the silicone to permanently adjust the window, put it in place just to check if it fits perfectly. Move on to the next step only if the window fits.

Check for Any Fitment Issues

Image by Peter Galvin

5. Install The New Window:

This step is fairly simple. Apply the silicone inside the window stop and then put the window in its place. Use the screws that came with the window to fix it in place. You do not have to work too much for this, as there would already be holes drilled in the window that you can insert the screws in.

Install The New Window

Image by Andersen Windows

6. Insulate Your Windows:

There will be big or small gaps around your newly installed window. They are very important to insulate them. If the gaps are big, you can use roll insulation. Just cut the roll insulation into pieces that can fit in between the gaps. Place the insulation pieces in the spaces making sure there’s no gap left. You can also use expanding insulation foam to fill the gaps. Apply the foam in between the gaps and give it an hour to expand. If the expansion is enough to fill the gaps, you’re good to go. If not, you can give another layer of insulation foam after an hour of applying the first layer. If the gaps are very small, you can use a bead of caulk for filling in.

About the author

Anees Saddique

Anees is full time blogger, writer and consultant provides tips, guides and articles related to lifestyle, tech, social media and business!

Leave a Comment